Loading
Part Number:
Quantity:
Price per Unit (in USD):
Total Amt:
Log in to myMicrochip to access tools and benefits. Sign up in just one minute.
Maximize Your Experience: Reap the Personalized Advantages by Completing Your Profile to Its Fullest! Update Here
Stay in the loop with the latest from Microchip! Update your profile while you are at it. Update Here
Complete your profile to access more resources.Update Here!
IEEE 802.11 b/g/n IoT Network Controller
Overview
Newer products
Compare Products
(2)
- Frequency Range:2.4
- Operating Temp (°C) Min:-40
- Operating Temp (°C) Max:85
- Operating Voltage (V) Min:3
- Operating Voltage (V) Max:4.2
- Packages:
- Power Down Mode Current Consumption (uA):4
- RX Current Consumption (mA):83
- TX Current Consumption (mA):287
- RX Sensitivity (dBm):-95
- SRAM (KB):224
- Sleep Mode Current Consumption (μA):390
- SoftAP Client Count:1
- Supported Host OS:Linux
- TX Output Power (dBm):18.5
- Downlink Throughput (Mbps):11
- Uplink Throughput (Mbps):10
- Wi-Fi Security:WPA, WPA2, WEP
- Encryption:WEP, WPA-TKIP, WPA2, CCMP-AES
- Product features:
- Single-band 2.4GHz b/g/n
- Compatible with Wi-Fi 6/7 2.4 GHz band
- Extreme low-power
- Compact footprint: 5 x 5 mm QFN
- Operating voltage: 3.0 V to 4.2 V
- Serial host interface: SPI
- Security protocols supported: WPA/WPA2 Personal, TLS, SSL
- Network services: DHCP, DNS, TCP/IP (IPv4), UDP, HTTP, HTTPS
- Supported antenna options: PCB or uFL
- Available in a fully-certified module package:
- ATWINC15x0-MR210PB1961 (PCB antenna)
- ATWINC15x0-MR210UB1961 (u.FL antenna)
- Drivers and sample application softwares available in:
- Advanced Software Framework (ASF)
- MPLAB Harmony
- MPLAB MLA
Microchip's ATWINC1500 is an IEEE 802.11 b/g/n IoT network controller that has networking stack built on the chip. It is the ideal add-on to existing MCU solutions bringing Wi-Fi and Network capabilities through SPI-to-Wi-Fi interface. It connects to any SAM or PIC MCU with minimal resource requirements.
The ATWINC1500's most advanced mode is a single stream 1x1 802.11n mode. Its networking stack consists of HTTP, TCP, IP and Ethernet Protocols corresponding to Application, Transport, Internet and Data Link Layers.
The ATWINC1500 features:
- A fully integrated power amplifier, LNA, switch and power management.
- Internal Flash memory to store firmware
- Multiple peripheral interfaces including UART and SPI
- And only requires a high-speed crystal or oscillator (26 MHz) as a clock source
The ATWINC1500 is available in a QFN package or as a fully-certified module with u.FL connector or PCB antenna.
- ATWINC1500 has 4 MB of flash memory which can be used for system software
- ATWINC1510 has 8 MB flash memory for even greater flexibility
A MCU host driver can be found in the Advanced Software Framework (ASF) and in MPLAB(r) Harmony v3.
Microchip's complimentary and confidential Wireless Check online design review service is available for customers who have selected our products for their application design-in*.
*The online design review service is subject to Microchip's Program Terms and Conditions and requires a myMicrochip account.
Use your up or down key to switch images.
Tools And Software
Demo & Evaluation Boards
| Tools |
|---|
 Microchip's Wi-Fi® Smart Device Enablement Kit is designed to accelerate adding Alexa Voice Control to your existing application, enabling rapid prototyping.
|
| By providing everything from the silicon to the development tools and even sample code, customers can get to market fast with no expertise needed using the CEC1702 IoT Development Kit. This kit is able to connect to the cloud using different platforms. The first connectivity will be for Microsoft Azure Cloud. While being connected to the cloud comes with inherent security risks, Microchip’s CEC1702-based Azure-certified solutions incorporate security features to enable custo |
| The SAMW25 Xplained Pro evaluation kit is a wireless hardware platformto evaluate the ATSAMW25H18-MR510PB Wi-Fi module which is basedon the industry - leading low - power ATWINC1500 Wi-Fi SoC. |
| ATWINC1500-XPRO is an extension board to the Xplained Pro evaluation platform. |
| The ATWINC1500-XSTK Xplained Pro starter kit is a hardware platform for evaluating the ATWINC1500 low cost, low power Wi-Fi module. |
["developmentenvironment","Development Environment"] ,
["emulators","Emulator and Debuggers"] ,
["demoevaluationboards","Demo & Evaluation Boards"] ,
["programmerrelations","Programmers"] ,
["thirdpartytools","3rd Party Tools"] ,
["legacy","Legacy"] ,
["softwarelibraries","Library and Firmware"]
referencedesigns,Reference Designs:
codeexamples,Code Examples:
ibisboarddesignfiles,Board Design Files: