Loading
Part Number:
Quantity:
Price per Unit (in USD):
Total Amt:
Log in to myMicrochip to access tools and benefits. Sign up in just one minute.
Maximize Your Experience: Reap the Personalized Advantages by Completing Your Profile to Its Fullest! Update Here
Stay in the loop with the latest from Microchip! Update your profile while you are at it. Update Here
Complete your profile to access more resources.Update Here!
true
WinPath3 Network Processors
Overview
- 12 RISC processors and 64 concurrent hardware threads processing at up to 450 MHz
- Dual multi-threaded MIPS 34Kc® cores at 650MHz with L1 and L2 caches
- 3 level hierarchical shaper with 16K Flows with WRED accelerators
- 16x GbE and Two 10GbE MACs
- 14 multi-standard SERDES lanes
- 16 TDI supporting T1/E1/T3/E3 or CT/MVIP bus
- 2.5MB Internal memory; 3x 16-bit / 32-bit DDR3 interfaces
- 31mm x 31mm 896 FCBGA with 1mm ball pitch
This third generation of
WinPath® products builds upon hundreds of successful customer communications
system deployments and leverages the broad set of supplied protocols developed
for WinPath1 and WinPath2. These protocols include support for L2 and L3
termination (including Ethernet, ML-PPP, IMA, CES), PWE3 (for Ethernet, TDM,
HDLC, ATM), Packet Network Synchronization (IEEE 1588v2, Synchronous Ethernet,
adaptive and differential clock recovery), interworking (MPLS, IPv4/IPv6
Routing, VLAN-aware bridging), OAM (for Ethernet and ATM), QoS (policing,
shaping, per-flow queuing, WRED) and many others.
WinPath3 integrates control plane and enhanced data plane processing components. Control plane processing is based on two high performance MIPS 34K multi-threaded processors.
Data plane processing uses new hardware accelerators for packet classification, hierarchical shaping, additional security standards and more which have been added to off-load common processing tasks. These accelerators are flexibly combined with Microsemi's field-proven, fully-programmable, high performance, multi-threaded WinComm multi-core data path processor subsystem. The available number of cores in WinComm has increased from six to twelve along with increases in operating speed.
WinPath3 integrates control plane and enhanced data plane processing components. Control plane processing is based on two high performance MIPS 34K multi-threaded processors.
Data plane processing uses new hardware accelerators for packet classification, hierarchical shaping, additional security standards and more which have been added to off-load common processing tasks. These accelerators are flexibly combined with Microsemi's field-proven, fully-programmable, high performance, multi-threaded WinComm multi-core data path processor subsystem. The available number of cores in WinComm has increased from six to twelve along with increases in operating speed.
Use your up or down key to switch images.
["developmentenvironment","Development Environment"] ,
["emulators","Emulator and Debuggers"] ,
["demoevaluationboards","Demo & Evaluation Boards"] ,
["programmerrelations","Programmers"] ,
["thirdpartytools","3rd Party Tools"] ,
["legacy","Legacy"] ,
["softwarelibraries","Library and Firmware"]
referencedesigns,Reference Designs:
codeexamples,Code Examples:
ibisboarddesignfiles,Board Design Files: